2021 AirCam

2017 Turbo AirCam

2017 Turbo AirCam – $325,000 – High-Performance Gen 3 Prototype This is the ultimate Turbo AirCam, built for high-altitude performance with 135 HP per engine, MT constant-speed props, and an extended range. Originally the Gen 3 factory prototype, but upgraded with more power and capability. Total Time: ~190 hours Seating: 3 carbon seats with custom upholstery Avionics & Controls: Super clear front and rear glass panels, dual toggles Performance Upgrades: Full enclosure, 8.50x6 tires, double Beringer brakes, heated seats Fuel & Systems: Three 14-gallon tanks (not two!), dual electric system, carb heat Float Ready: Factory float brackets installed; Clamar amphibious floats available at extra cost Paint: Eye-catching custom scheme This AirCam delivers obscene short-field performance with exceptional power and range. N914TU is currently in Hamilton, MT. For more details, call Robert Meyer at 407-670-8382. Located in Sebring, FL (33875, USA).

Sebring, FL

Gen 3 AirCam

Professionally built and adventure-equipped Gen 3 AirCam with dual Rotax 914 turbo engines and Airmaster reversing propellers. Features dual Dynon SkyView HDX panels (front and rear), 31" tundra tires, and Beringer wheels/brakes. Built for true backcountry STOL performance with a total build cost of $425,000—now offered at $349,000. Aircraft Overview: •Model: Gen 3 AirCam •Location: Alpine, WY (46U) •Total Build Cost: $425,000 •Asking Price: $349,000 Powerplant: •Dual Rotax 914 Turbocharged Engines •Airmaster constant-speed reversing propellers Avionics: •Dual Dynon SkyView HDX (Front & Rear) Landing Gear: •31” off-airport tires •Beringer wheels and brakes Key Features: •Redundant twin-engine configuration for safety •True STOL performance for remote strip operations •Reversing props for unmatched ground control •Ideal for mountain, desert, and island adventures •Low-time, professionally built airframe •Turnkey and ready for immediate backcountry use Contact:
Harry Hedaya
📍 Tampa, FL 33607
📞 Contact details available upon request. Price: $349,000 USD – Adventure-ready, premium backcountry AirCam

Tampa, FL

2001 AirCam (Experimental)

This 2001 Air-Cam is the ultimate low-and-slow adventure platform—twin-engine safety, unbeatable visibility, and all the right avionics upgrades. With just 945 hours total time, it’s powered by dual Rotax 912-S engines (100 HP each) and is loaded with Garmin gear including dual G5s and aera 760 GPS. Extras include canopy and engine covers, lockable baggage, and full ADS-B compliance. Based in Savannah, GA and ready to fly today. Year: 2001 Model: Air-Cam (Experimental) Price: $140,000 Location: Savannah, GA 31419 TTAF: 945 hours Engines: (2) Rotax 912-S, 100 HP each Fuel Capacity: 28 gallons Avionics: Garmin GTR 200 Radio (auto-tune) Garmin GTX 327 Transponder (ADS-B Out) Garmin GDL 39 (ADS-B In) Garmin aera 760 portable GPS Dual Garmin G5 EFIS Features: Lockable baggage storage Canopy cover and engine covers included Exceptional short-field capability Highly reliable and easy to maintain Contact: William Webb Phone: see number below

2008 AirCam

2008 AirCam – $120,000 Total Time: 675 hours Engines: Twin Rotax 912ULS (100HP upgraded to 115HP with big bore kits from South Mississippi Light Aircraft) Propellers: Warp Drive Avionics: Garmin 495 (front and rear), two Becker radios, PS Engineering intercom, Becker transponder, Garmin GDL 82 (ADSB-Out) Lighting: LED position and strobes, landing light with WIG-WAG Features: Enclosed lockable baggage compartment, rear seat enclosure, like-new 8.50x6 tires Condition: Excellent, all Rotax service current Additional: Float-ready, amphib capable Great for multi-engine time building at ~$25/hr! 📍 Located in Salmon, ID 📞 Contact Sam Chambers at number below

Salmon, ID